Vertical Insulating Glass Machine Insulating Glass Production Line

Product Description

Vertical insulating glass cleaning machine insulating production line

Product Description

Insulating Glass Production Line is the essential machine of insulating glass produciton line, it can make stepped glass, shaped glass, double layers and three layers. This Insulating Glass Machine is special equipment for aluminum groove type insulating glass, it can make two-layer and three-layer insulating glasses with equal and unequal glass sheets.

1.Insulating glass line with high automatic level is fully controlled by PLC system,the operation is easy and humanized
2. Touch screen operation interface.It is easy to transfer between automation and hand-operation
3. Self diagnosis system brings much high convenience to the user
4. Automatically distinguish the film of LOW-E and coated glass
5. The washing part is completely made of stainless steel, tempered glass door makes the operation inside clearly monitored, Signal switch on the top of the door avoid possible injure to the operater
6. Energy saving and interrupted system for the washing machine
7.Unique water nozzle design makes the maintenance easy and fast
8.Heating system for the water and blowing air. Start it when the ambient temperature no more than 7 degree
9.Automatic control 8 brushers for Glass
10.There is special system for Producing triple insulating glass
11. Having system for wrong operation and automatically wait the second glass following.
12. Automatic assembly inside the press machine
13.High class casting and processing of spare parts assure good stability of the line
14.The key connections use expanded joint in stead of common union.This guarantee high adjustment precision and conveying reliability

Technical parameter:

Max working size	1800*2500mm
Min working size	300*500mm
Single Glass Thickness	3-25mm
Max IGU thickness	50mm
Washing speed	0-8m/min
Conveyor speed	45m/min
Cycle	30-40 seconds(900*1200mm)
Brusher	3 pairs
Brusher Diameter	Rough: 0.1mm, Fine: 0.06mm
Electricity power	3P 380V/50HZ or 3P 220V/60HZ
Dimension	15000*2500*3600mm
Water	0.5 ton per day
Air Exhaust volume	0.8m3/min
Air pressure	1.0Mpa
Insulating Glass production Line 1800
Technical parameter:
Max working size	1800*2500mm
Min working size	300*500mm
Single Glass Thickness	3-12mm
Max IGU thickness	50mm
Washing speed	0-8m/min
Conveyor speed	45m/min
Cycle	30-40 seconds(900*1200mm)
Brusher	3 paris
Brusher Diameter	Rough: 0.1mm, Fine: 0.06mm
Electricity power	3P 380V/50HZ or 3P 220V/60HZ
Dimension	15000*2500*3600mm
Water	0.5 ton per day
Air Exhaust volume	0.8m3/min
Air pressure	1.0Mpa
Insulating Glass production Line 2000
Technical parameter:
Max working size	2000*3000mm
Min working size	400*300mm
Single Glass Thickness	3-12mm
Max IGU thickness	50mm
Washing speed	0-8m/min
Conveyor speed	45m/min
Cycle	30-40 seconds(900*1200mm)
Brusher	4 paris( two pairs for LOW-E)
Brusher Diameter	Rough: 0.1mm, Fine: 0.06mm
Electricity power	3P 380V/50HZ or 3P 220V/60HZ
Dimension	18000*2200*3600mm
Water	0.5 ton per day
Air Exhaust volume	0.6m3/min
Air pressure	0.7Mpa
Insulating Glass production Line 2200
Technical parameter:
Max working size	2200*3500mm
Min working size	400*600mm
Single Glass Thickness	3-12mm
Max IGU thickness	50mm
Washing speed	0-8m/min
Conveyor speed	45m/min
Cycle	30-40 seconds(900*1200mm)
Brusher	4 paris( two pairs for LOW-E
Brusher Diameter	Rough: 0.1mm, Fine: 0.06mm
Electricity power	3P 380V/50HZ or 3P 220V/60HZ
Dimension	21000*2500*3600mm
Water	0.5 ton per day
Air Exhaust volume	0.8m3/min
Air pressure	1.0Mpa
Insulating Glass production Line 2500
Technical parameter:
Max working size	2500*3500mm
Min working size	400*600mm
Single Glass Thickness	3-12mm
Max IGU thickness	50mm
Washing speed	0-8m/min
Conveyor speed	45m/min
Cycle	30-40 seconds(900*1200mm)
Brusher	4 paris( two pairs for LOW-E
Brusher Diameter	Rough: 0.1mm, Fine: 0.06mm
Electricity power	3P 380V/50HZ or 3P 220V/60HZ
Dimension	21000*2500*3600mm
Water	0.5 ton per day
Air Exhaust volume	0.8m3/min
Air pressure	1.0Mpa

Input section: First, put the prepared glass on the input section. If the glass is less than 1.8m, the glass is small and can be lifted up manually. If the glass is larger, a glass lifter is required.

 

Drying and washing section: After the glass is placed on the input section, it will be automatically transferred to the second section, which is the drying and washing section, for cleaning and drying.

 

Inspection section: The cleaned glass is transferred to the inspection section, which has a lamp to check whether the glass is clean. If it is not clean, it needs to be reworked.

 

Aluminum frame positioning section: The cleaned glass will then be transferred to the aluminum frame positioning section, where the prepared aluminum frame will be put on the glass, and then the pedal will be stepped on, and the glass will be transferred to the next section.

Outer joint segment: The glass with aluminum frame stops on the outer joint segment, waiting for the second glass to be transferred, and then it is transferred to the same position on the outer joint segment as the first glass with aluminum frame, and the two glasses are pressed together.

 

Pressing segment: The glass pressed in the outer section will enter this pressing segment for pressing

 

Outer section: The pressed glass is transferred to the discharging section for discharging

Related Products

FAQ

1.Question:Are you manufacturer?

Answer:

Yes,we are the professional manufacture which have more than 5 workshops.

2.Question: How about the service ?
Answer:
1).reply it at once if from Ali-trademanager,if by email,it reply it within 12 hour
2).deliver max. days within 15 days
3).24 hours for after -sale serive
4).more than 12 years experience in this kind machine field
5).fluent english ,communication barrier free

3.Question:What's the guarantee ?
Answer:
1).Our guarantee for 18 months.
2).24 hour's technical support by email or calling
3).English manual and video tutorial
4).2 year quality guaranty for the machine (excluding the consumables)
5).We will provide the consumable parts at an agency price
6).24 hours on line service each day, free technical support.

4. Q: Do you provide equipment operation training?

Answer:
A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training. All of our engineers have passport.

5.Question:if our price is higher than another company or factories ?
Answer:
please check, what is is the different of the machine parts ,service and guarantee,especially the machine inner electric parts, sometimes, if machines have breakdown, the most reason is the machine inner electric parts problem, but we use the famous and reliable parts for the machines inside.

6.Question:How long is the delivery time ?
Answer:
For standard machines, it would be 3-15 days; For non-standard machines and customized machines according to clients specific requirements, it would be 15 to 30 days.

7.Question: What is the payment ?
Answer:
Any payment method you want,such as L/C,T/T,D/P,West-union and so on